Expert Answers about ATV-UTV Mirrors
- Snowmobile Kit for Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps
- We do offer both the ramps and snowmobile kit you're inquiring about, the Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps part # MR54FR and Snowmobile Ramp Kit part # MR69DR which is everything you need to load and secure a snowmobile in your truck bed.
view full answer... - Where to Place ATVs on Trailer According to Weight
- When loading a trailer you want to have as much of the weight of the cargo as far forward as possible, otherwise the trailer will sway. In your case I would recommend putting the heavier side by side in the front of the trailer and the ATV behind it.
I attached an article with other tips on towing a trailer for you to check out as well.
If your trailer and cargo weigh more than 50 percent of the total weight I would also recommend you look into a weight distribution system.
The best...
view full answer... - ATV Hitch, 4 inch Rise Ball Mount and Hitch Recommendation
- What you could do is install the Curt ATV hitch part # C45006 on your ATV and then use a ball mount with a 4 inch rise like the part # C45070 and then for a 2 inch ball part # 63845. Finally for a hitch pin part # C21500.
view full answer... - Winch and Custom Winch Mount for a 2015 Polaris RZR 900
- Yes, you can install Superwinch ATV/UTV winch # SW1135220 on your 2015 Polaris RZR 900. You just need the proper mount kit for the UTV. I recommend custom mount kit # BDW15182. The winch fits the mount kit and the mount kit fits your RZR! I have linked a video review of the mount kit for you.
view full answer... - Straps For Securing an ATV/UTV to Trailer for Towing
- The Erickson Re-Tractable Ratchet Straps # 34414 are capable of being mounted permanently. These are great straps and the push button retract is a great feature. Unfortunately I do not recommend permanently mounting any material straps as they do deteriorate from UV damage and weather.
For your situation I recommend the Pack'em Wheel Tie-Down Kit # PK-WTD. This anchors your UTV at the wheels allowing your suspension to move and not risking damage to the suspension components by overloading...
view full answer... - Recommended Tire Chains for Coleman 400 UTV
- The Titan Chain ATV Snow Tire Chains part # TCATV9-4 are what I recommend for your Coleman 400 UTV. They can be used on both the front 25x8-12 and rear 25x10-12 tires. The v-bar shape and studded twist link design will allow you to drive in both deep snow and ice without issue.
view full answer... - Winch for Use with UTV JD Gator for Plow Use with Handlebar Remote
- The Superwinch Terra Series ATV Winch # SW1125230 that you referenced does come with a handlebar remote like you are wanting so it would work great for your application. It has a 2,500 lb capacity too so it would work great for a plow application as well.
view full answer... - Side Mirror Recommendation for Gator UTV
- We have the CIPA Adjustable Side Mirrors for UTVs # CM01139 which can attach to roll cage bars on John Deere Gator, Kawasaki Mule, Polaris Ranger, Polaris RZR, and Yamaha Rhino so it would work well for you.
view full answer... - Recommended Winch Wiring Kit for ATV with Quick Disconnects
- The Bulldog Winch Wiring Kit for ATV/UTV Winches part # BDW20305 is the perfect option for connecting a winch to the battery on an ATV and it has the quick connectors which allow you to easily remove and reinstall the winch. This kits uses 6 gauge wire which will be perfect.
The smallest size wire that can be used for 120 amps at 3' is 8 gauge but 6 gauge would be better and allow for more room for error.
view full answer... - Recommended Winch Mount for ATV
- The T1500 you mentioned has mounting holes 3.1 inches on center that are 0.34 inches diameter. The mounting brackets we have are custom fit for ATV and UTV's so I would need to know what you have to help with the fit. I've attached the link to our ATV winch mount fit guide.
Based on your winch, I believe you will need to drill new holes as standard winch mounts like the receiver mount # C31010 will have holes spaced differently as outlined in the attached photo.
view full answer... - Using Cargo Carrier Off-Road on an ATV
- I would not recommend using any folding carrier on an ATV. The folding portion of the rack is the weak point of the rack from an engineering standpoint. It's not an issue when driving on pavement, but hitting bumps and ruts at full speed while the carrier is loaded could cause the carrier to fail.
I see no reason why you couldn't use a non-folding carrier like the Pro Series # 63153. The carrier has a non-folding shank which would be more rigid and would work better off road.
To see...
view full answer... - Recommended Trailer for Transporting ATV and Tractor
- In order to carry your tractor or ATV I actually recommend the Detail K2 Mighty Multi Utility Trailer part # K2MMT4X6, not the Detail K2 Mighty Multi A-Frame Utility Trailer part # K2MMT5X7. The reason for this is because the ramp on part # K2MMT5X7 is much too steep to load a tractor or ATV. You will need one with less of an angle like part # K2MMT4X6. This trailer is actually designed for loading ATVs, UTVs, and other equipment such as your tractor.
In order to make sure the latter...
view full answer... - UTV Mirror Recommendation for a 2012 Can Am Commander with 2 inch Roll Cage Bar
- I have a mirror that would work great on your 2012 Can Am Commander with 2 inch bars, but the # CM33000 that you referenced is designed to attach to windshields so it would not work.
You would want the CIPA Extra Large UTV Rearview Mirror # CM-99287 as this has been confirmed to fit bars that are from 1-3/4" to 2" like what you have.
I attached an install video for this mirror for you to check out as well.
view full answer... - E Track Tie Down Kit Recommendation for Razor UTV
- If your trailer has Etrack installed in it like the part # E19148 the Erickson ATV E-Track Tie-Down Kit # EM09160 that you referenced would be a great option.
This kit has a safe working load limit of 1,500 lbs with a max break strength of 4,500 lbs so it would have more than enough capacity.
view full answer... - Tie Down Kit Recommendation for Kawasaki Tyrex 4 LE on Utility Trailer
- If you used the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks # EM09160 on all 4 wheels of your UTV you'd have more than enough capacity for your 1,700 lb Kawasaki Tyrex 4 LE.
I attached an install video for this for you to check out as well.
view full answer... - Will Erickson ATV E-Track Tie-Downs EM98CV Be Able To Secure 2006 Kawasaki Mule 3010?
- Yes, the Erickson ATV E-Track Tie-Downs # EM98CV includes wheels chocks and straps for four wheels and will accommodate vehicles weighing in at 3000lb maximum with tires between 10" and 30" in diameter. Since your 2006 Kawasaki Mule 3010 weighs in right around 1500lbs this would be a perfect option for you.
I do recommend adding two sets of the Backing Plates # e66RR to better distribute the clamping force of the bolts holding the e-tracks to the trailer.
I included videos of the products...
view full answer... - Does CIPA ATV Handlebar Mirror CM11132 Fit 2016 Honda TRX 680
- Yes the CIPA ATV Handlebar Mirror # CM11132 that you referenced does fit the handlebars of your 2016 Honda TRX 680.
view full answer... - Could Mad-Ramps be Used with 6 Passenger Golf Cart
- Mad-Ramps states that the part # MR54FR is best suited for ATVs/UTVs with one row of seats but if the width of your golf cart is less than 60 inches and the wheel base is less than 88 inches this would work for you.
view full answer... - LED Light Recommendation for the Handlebars on a 2006 Honda TRX 450R
- Given the limited space on the handlebars of ATVs and UTVs like your 2006 Honda TRX 450R you will want to look at a light that has a single, center mounting point such as # TLL60FB or # TLL45FB. Then you could more easily mount more than one on the handlebars.
view full answer... - Winch and Mounting Plate Recommendation for a 2014 Polaris Ranger 570
- Yes, we do offer a winch mount that has been confirmed to fit your 2014 Polaris Ranger 570 that would work great with the Superwinch LT3000ATV Winch # SW1130220 that you referenced.
You would want the part # SW1130220 as this has been confirmed to fit your UTV.
view full answer...
Go To Results